Roofing

Roofing dumpster rental and shingle weight calculator

Estimate your tear-off weight, likely dumpster sizes and cost, then send the estimate with your quote request.

Roofing dumpster calculator

Enter your roof size and what's coming off. You'll get an estimated debris weight, likely dumpster sizes and an estimated cost.

1 roofing square = 100 square feet of roof surface. A 2,200 sq ft roof is 22 squares.
Count each layer of shingles on the roof now.
Estimated tear-off weight per square, per layer. Pick “Not sure” if you don't know.
Only used if you chose “I know my weight”. Between 100 and 1500.
Base rental covers up to 4 days. Extra days are $35 each.
Replacing rotted or old roof sheathing too?

Get a roofing dumpster quote

Include your roof size and layers. If you used the calculator, your estimate is attached automatically.

Fields marked * are required.

Optional. Base rental covers up to 4 days.

Your details go to the dumpster company handling your request so they can contact you. See the privacy note at the bottom of this page.

Torn-off asphalt shingles and roofing scraps piled inside an open container with wooden side walls
Shingle tear-off debris. It gets heavy long before the container looks full.

Why shingle weight decides the dumpster

Shingles weigh far more than they look. Estimate your tear-off before you order, so you know whether one dumpster will do and roughly what disposal will cost at $220 per ton.

Every standard dumpster has a 6-ton maximum loaded weight, and disposal is billed on the scale ticket after pickup. A roof that fits by volume can still be too heavy for one container.

How the calculator works

  1. Weight: squares × layers × pounds per square, plus about 150 lb per square if you're removing decking. Divide by 2,000 for tons.
  2. Weight check: every standard dumpster has a 6-ton maximum loaded weight. From 5 tons up to 6 tons, the calculator asks you to call and confirm before counting on one dumpster, because estimates can be off. 5 tons is the call-to-confirm point, not the dumpster's limit; the limit is 6 tons. Over 6 tons, it will not suggest a single dumpster.
  3. Volume check: the 10 yard has a maximum of 15 squares of composition roofing, counting each layer separately (squares × layers). For example, 15 squares × 1 layer fits; 16 squares × 1 layer, 30 squares × 1 layer and 8 squares × 2 layers (16 squares of material) do not, so the calculator leaves the 10 yard out for those roofs. The 20, 25 and 30 yard are listed for roof tear-offs without a square count, so they're always shown as options.
  4. Cost: base rental + estimated tons × $220 + any extra days you enter. The mileage surcharge ($5 per mile from mile 21, only for addresses outside the 20-mile radius) isn't included.

These are planning numbers. The scale ticket sets the real disposal charge.

Shingle weight assumptions

Estimated tear-off weight per square, per layer, used by the calculator:

Shingle typeEstimate per square
3-tab asphalt shingles250 lb
Architectural / dimensional shingles350 lb
Heavy or premium designer shingles450 lb
Not sure400 lb

Published ranges run about 200–250 lb per square for 3-tab and about 240 to over 400 lb for architectural shingles. Wet shingles, extra underlayment and nails add weight. If you know your product's weight, choose “I know my weight.”

Quick weight table

Architectural shingles at 350 lb per square, per layer:

Roof size1 layer2 layers
10 squares3,500 lb / 1.75 t7,000 lb / 3.5 t
15 squares5,250 lb / 2.63 t10,500 lb / 5.25 t (call to confirm)
20 squares7,000 lb / 3.5 t14,000 lb / 7 t (over max)
25 squares8,750 lb / 4.38 t17,500 lb / 8.75 t (over max)
30 squares10,500 lb / 5.25 t (call to confirm)21,000 lb / 10.5 t (over max)

"Call to confirm" means 5 tons or more. "Over max" means more than the 6-ton maximum for one dumpster.

Before the roofing crew starts

  • Put the dumpster close to the roof edge you'll tear off from, on a firm surface the truck can reach. Tell us about steep or soft driveways.
  • Two layers or a big roof? Call first. It may make sense to split the debris between two dumpsters instead of overloading one.
  • Older home? In Pierce and Kitsap counties, Puget Sound Clean Air Agency rules can require an asbestos survey before renovation or demolition work. See the agency's asbestos page.
  • Keep other heavy stuff out unless you've planned for it. Everything counts toward the same 6-ton limit.

More on allowed materials: what can go in a dumpster. Doing more than the roof? See construction dumpsters.

Roofing dumpster questions

What size dumpster do I need for a roof?

Start with weight. Every standard dumpster here has a 6-ton limit, so the first question is whether your tear-off fits under it. Then think volume: the 10 yard has a maximum of 15 squares of composition roofing (each layer counts separately), and the 20, 25 and 30 yard are listed for roof tear-offs and replacements. The calculator above shows the likely options and the estimated cost of each.

How much do shingles weigh per square?

Published figures put 3-tab shingles at roughly 200–250 lb per square and architectural shingles anywhere from about 240 to over 400 lb, depending on the product. The calculator lets you pick an assumption, or enter your own if you know the product.

What's a roofing square?

100 square feet of roof surface. A roof with 2,400 square feet of surface is 24 squares. Roof surface is bigger than the house's floor area because of pitch and overhangs.

Is the calculator price my final price?

No. It's an estimate. The disposal charge is based on the actual scale weight after pickup, and shingle weight varies by product, age and moisture. Base rental, the $220/ton rate and the extra-day rate are the current published prices.

Can I put tile or slate roofing in the dumpster?

Ask first. Tile and slate are much heavier than asphalt shingles and aren't covered by the size guidance on this page. Call (253) 499-7636 before ordering.

Call NowGet a Quote